Okin 6254 Moving Block for BetaDrive Motor Coarse Thread for Power Recliners

Description

The Okin 6254 Moving Block is a white plastic component measuring approximately 3″ x 4″. It is designed to be mounted on a Betadrive system for power recliners. This moving block plays a crucial role in the chair’s functionality as it allows the chair to move up and down along the stationary motor shaft.

SEO Meta Title: Okin 6254 Moving Block for BetaDrive Motor Coarse Thread for Power Recliners

SEO Meta Description: Ensure smooth movement of your power recliner with the Okin 6254 Moving Block. Designed for Betadrive systems, this white plastic block is essential for a comfortable seating experience.

Introduction

When it comes to power recliners, the Okin 6254 Moving Block is an indispensable component. This white plastic block serves as the connection point between the chair and the Betadrive system. By moving up and down the stationary motor shaft, the block enables the chair to adjust its position according to the user’s preference.

Main Title: Understanding the Thread Size

Identifying the Correct Moving Block

In the United States, there are primarily two types of white moving blocks used in power recliners. The key difference lies in the thread size within the block, specifically where the worm screw passes through the center. To determine which moving block you need, examine the aluminum shaft for slots – one at the top and one at the bottom. Shine a light into the slot and observe the black worm screw.

Counting the Threads

To identify the thread size, use a tape measure or ruler to select a thread on the worm screw. Count the number of threads or turns until the next inch on the ruler. There are two possibilities: either 6 threads (part #6254) or 9 threads (part #6256) per inch. While the 9 thread per inch size is more common, it is crucial to ensure the correct measurement as there are still enough 6 thread blocks in use.

Importance of Checking Thread Size

Before placing an order for a moving block, it is essential to verify the thread size. Ordering the wrong size and attempting to install it on your motor can lead to complications. Unfortunately, we cannot accept returns for incorrectly ordered moving blocks. Therefore, it is crucial to double-check the thread size to ensure a seamless installation.

Installation Instructions

For detailed installation instructions, please refer to the Okin Troubleshooting Guide. This guide provides step-by-step instructions to help you install the Okin 6254 Moving Block correctly, ensuring optimal performance of your power recliner.

Conclusion

The Okin 6254 Moving Block is a vital component for power recliners utilizing the Betadrive system. By understanding the importance of thread size and ensuring the correct measurement, you can guarantee a smooth and comfortable seating experience. Don’t forget to consult the Okin Troubleshooting Guide for detailed installation instructions to make the most of your power recliner.